Welcome To Jiangsu Kangtao Steel Co., Ltd.

+86 13338056578

stephanie@jsktsteel.com

Aluzinc Steel Coil AZ150 Roofing Guide: Benefits, Properties, and Uses

2026-11-21 09:40

Image Source: statics.mylandingpages.co Aluzinc steel coil AZ150 is a steel coil hot-dip coated with a 55% aluminum–43.4% zinc–1.6% silicon alloy at a coating weight of 150 g/m². This aluzinc coating balances corrosion resistance, heat reflectivity, and cost for roofing systems. The coating designation directly shapes metal roofing performan

Aluzinc
Image Source: statics.mylandingpages.co

Aluzinc steel coil AZ150 is a steel coil hot-dip coated with a 55% aluminum–43.4% zinc–1.6% silicon alloy at a coating weight of 150 g/m². This aluzinc coating balances corrosion resistance, heat reflectivity, and cost for roofing systems.

The coating designation directly shapes metal roofing performance. Galvalume and other coated coils serve demanding roofing projects, and each coating type offers distinct advantages.

AZ150 is a coating designation, not a steel grade. Buyers specify substrate thickness and strength separately from the coil coating.

Key Takeaways

  • AZ150 steel coils resist rust and reflect heat, keeping roofs cool and durable.
  • Choose AZ150 for roofing projects in harsh climates to save on energy and maintenance.
  • Always check the mill certificate and coating weight to ensure you get quality AZ150 coils.

What Is Aluzinc Steel Coil AZ150?

Aluzinc steel coil AZ150 is a flat-rolled steel product with a hot-dip coating applied in a continuous line. The base steel passes through a molten bath, and the layer bonds to the surface as the strip cools. Manufacturers then wind the finished strip for shipping and further processing. This product belongs to the family of aluminum-zinc alloy coated steel coil products, and buyers often compare it with galvalume steel coil options. A buyer can order the product in various substrate grades and thicknesses.

Coating Composition and Structure

The layer on this product consists of 55% aluminum, 43.4% zinc, and 1.6% silicon by weight. This aluminum-zinc-silicon alloy coating solidifies into a distinctive microstructure. Aluminum-rich dendrites form the main body of the deposit, and zinc-rich phases fill the spaces between them. The silicon addition improves adhesion between the film and the steel substrate. The dendritic pattern also creates a tortuous path for moisture and oxygen.

The structure delivers a dual protective effect. The aluminum component creates a dense oxide barrier on the surface. The zinc component provides sacrificial protection at cut edges and scratches. This combination gives the aluminum-zinc alloy coating its strong corrosion performance in many environments.

ElementShare by Weight
Aluminum55%
Zinc43.4%
Silicon1.6%

What the AZ150 Designation Means

The letters AZ identify the layer type. The number 150 states the coating weight in grams per square meter, measured across both surfaces. So an AZ150 product carries 150 g/m² of aluminum-zinc deposit in total, or roughly 75 g/m² per side.

This naming convention follows the same logic as other coated products. A galvalume steel strip uses the AZ designation in many regional standards, and suppliers often treat galvalume and AZ150 as overlapping terms. The galvalume label and the AZ150 label describe the same family of aluminum-zinc products. Some buyers refer to the aluzinc surface by the galvalume name, and a galvalume steel coil from one mill may match an AZ150 product from another.

The AZ150 label describes the layer only. It says nothing about the steel grade, yield strength, or thickness. Buyers must specify those properties separately when they order an az coated steel coil. Suppliers may also label the same product as an aluminum-zinc coated steel coil or a zinc-aluminium coated steel, depending on the region.

The coating weight of 150 g/m² has become a common choice for roofing and cladding. It offers a practical balance between protection and cost. A heavier deposit adds corrosion resistance but raises the price. A lighter deposit saves money but shortens service life in aggressive conditions. A specifier who writes aluzinc steel coil AZ150 on a purchase order defines the layer, not the steel.

Properties That Drive Roofing Performance

Roofing systems face constant attack from rain, sun, temperature swings, and airborne pollutants. The aluzinc steel coil must resist all of these forces over decades of service. Three properties determine how well the material performs on a roof: corrosion resistance, heat reflectivity, and formability. Each property traces back to the aluminum-zinc alloy coating and the way manufacturers apply it to the steel substrate.

Corrosion Resistance Mechanism

The aluminum-zinc alloy coating protects steel through two distinct mechanisms. The aluminum-rich phase forms a dense oxide layer on the surface. This layer blocks moisture and oxygen from reaching the steel beneath. The zinc-rich phase provides sacrificial corrosion protection at cut edges, scratches, and fastener holes. Zinc corrodes before steel does, so the coating sacrifices itself to protect the base metal.

This dual mechanism gives the coating excellent corrosion resistance in most outdoor environments. The oxide barrier handles steady exposure to humidity and rain. The sacrificial action handles localized damage from handling, installation, and weather. Together, the two mechanisms deliver atmospheric corrosion resistance that outperforms plain zinc coatings in many settings.

The dendritic microstructure of the coating slows the corrosion process further. Moisture must travel a winding path through the aluminum-rich and zinc-rich phases. This tortuous route limits the speed of electrochemical attack. The silicon content also improves the bond between the coating and the steel. A tight bond prevents undercutting corrosion at damaged areas.

Galvalume products use the same 55% aluminum, 43.4% zinc, and 1.6% silicon composition. The corrosion behavior of galvalume therefore mirrors that of AZ150. Both products rely on the same barrier and sacrificial effects. A galvalume steel strip and an AZ150 coil share this protective structure. Buyers who understand one product understand the other.

The environment shapes how well the coating performs. Marine air carries chloride salts that accelerate corrosion. Industrial areas carry sulfur compounds and acidic fallout. Rural areas offer the mildest conditions. The coating resists all three environments, but service life varies with exposure severity. A heavier coating weight extends life in aggressive settings. The AZ150 designation provides a solid baseline for most roofing projects.

Heat Reflectivity and Thermal Performance

The aluminum component gives the coating its reflective power. Aluminum surfaces reflect a large share of solar radiation in the visible and near-infrared bands. This reflectivity keeps the roof surface cooler under direct sun. A cooler roof surface reduces heat flow into the building below.

The thermal benefit shows up in two ways. First, the roof surface stays cooler, so the attic or plenum space absorbs less heat. Second, the building's cooling system works less to maintain indoor temperatures. Property owners see lower cooling loads during summer months. Energy savings vary with climate, insulation, and building design, but the reflective surface contributes in every case.

The coating holds its reflectivity over time. The oxide layer that forms on the aluminum-rich phase stays thin and stable. Unlike bare metal surfaces that dull quickly, the coated surface maintains much of its initial reflectance. Dust and dirt reduce reflectivity somewhat, and rain usually washes these deposits away. Regular cleaning restores performance when needed.

Galvalume roofing products market this thermal performance as a core benefit. The galvalume name appears on product literature for cool-roof programs and energy codes. An AZ150 coil delivers the same reflective behavior. Specifiers who compare galvalume and AZ150 for a roofing project will find identical thermal properties.

Formability and Coating Adhesion

Roofing profiles require the coil to bend, fold, and stretch without cracking the coating. Corrugated sheets, standing seam panels, and tile profiles all demand forming operations after the coil leaves the mill. The coating must move with the steel during these operations.

The aluminum-zinc alloy coating adheres tightly to the substrate. The silicon addition plays a key role here. Silicon improves wetting between the molten coating and the steel during the hot-dip process. Better wetting produces a stronger metallurgical bond. The bond survives roll forming, bending, and moderate drawing operations.

Coating adhesion depends on proper mill practice. The steel surface must be clean before it enters the molten bath. Line speed, bath temperature, and cooling rate all affect the final bond. A well-made coil forms cleanly with no flaking or powdering at the bends. A poorly made coil shows coating loss at tight radii and along sheared edges.

Formability also depends on the steel substrate. Buyers specify substrate grade separately from the coating. A drawing-quality steel grade forms more easily than a structural grade. Roofing profiles usually need a substrate with moderate ductility and adequate strength. The coil supplier should confirm that the substrate grade suits the intended forming operation.

Galvalume steel strip producers publish forming guidelines for their products. These guidelines apply to AZ150 coil as well. Bend radii, forming speeds, and tooling clearances all follow the same rules. Fabricators who already run galvalume will find AZ150 familiar on the forming line.

Key Benefits for Roofing Applications

Long Service Life in Harsh Environments

An aluzinc steel coil delivers excellent corrosion resistance across demanding climates. The aluminum-zinc coating blocks moisture and oxygen, and the zinc phase adds sacrificial corrosion protection at cut edges. This dual action produces strong atmospheric corrosion resistance in coastal, industrial, and rural settings. Galvalume products share the same alloy, so galvalume roofing performs identically. A heavier coating weight extends service life further. Galvalume coil suppliers often publish decades-long performance data for these environments. The coating resists corrosion well when installers avoid damaging the surface during handling.

Lower Cooling Loads and Energy Savings

The aluminum-rich surface reflects a large share of solar radiation. A cooler roof surface reduces heat flow into the building below. Property owners then see lower cooling loads during summer. Galvalume roofing markets this thermal benefit for cool-roof programs and energy codes. An aluzinc coil provides the same reflective behavior. Galvalume coil buyers gain identical thermal performance at a comparable price.

Cost Efficiency and Low Maintenance

Aluzinc roofing applications balance protection and cost effectively. The coil needs little maintenance beyond occasional cleaning. Rain usually washes away dust and restores reflectivity. Galvalume coil remains a cost-efficient choice for most projects. A galvalume steel coil also resists corrosion with minimal upkeep. These roofing systems reward buyers with low lifetime costs.

Aluzinc Steel Coil vs. Galvanized Steel

Performance Comparison

Galvanized steel carries a zinc coating, and an aluminum-zinc coated steel coil carries the aluminum-zinc alloy. The two products protect steel in different ways. Zinc coatings rely on sacrificial action alone. The aluzinc layer adds a dense oxide barrier on top of that sacrificial effect. This difference shapes long-term corrosion behavior in most environments.

PropertyGalvanized SteelAluzinc (Galvalume)
Coating compositionZinc55% aluminum, 43.4% zinc, 1.6% silicon
Corrosion protectionSacrificial onlyBarrier plus sacrificial
Heat reflectivityModerateHigh
Cut-edge protectionGoodGood
Relative costLowerModerate

A galvalume steel coil typically outperforms galvanized steel in atmospheric corrosion tests. The galvalume roof also reflects more solar heat. Galvanized steel still performs well in mild settings and costs less upfront.

Where Each Option Fits Best

Galvanized steel suits indoor applications, mild climates, and projects with tight budgets. A galvalume steel strip fits roofing in coastal, industrial, and humid regions. The higher coating weight of a galvalume steel coil extends service life outdoors. Buyers who need a reflective roofing surface choose galvalume. Each coil option serves its own niche well.

Understanding the AZ150 Coating Weight

How Coating Weight Is Measured

Coating weight states how much metal sits on the steel surface. Mills measure it by dissolving the layer from a sample and weighing the removed material. The standard triple-spot test takes samples from the strip and reports the average. Results appear in grams per square meter across both surfaces. An AZ150 coil therefore carries about 75 g/m² per side. Buyers can request a certificate that lists the measured coating weight for each coil. This number matters more than the label alone, because mills control it within a tolerance range.

Why 150 g/m² Suits Roofing

A 150 g/m² coating weight balances protection and cost for most roofing projects. The aluminum-zinc alloy coating blocks moisture and resists corrosion in rural, urban, and moderate coastal settings. Heavier coatings raise the price and add little value in mild climates. Lighter coatings save money but shorten service life outdoors. The 150 g/m² level has become a common baseline for galvalume roofing profiles. A galvalume steel coil at this weight forms cleanly into panels and sheets. Fabricators who run a galvalume steel strip at AZ150 report consistent results on roll formers. The same coating weight also supports long service life when installers handle the coil with care.

International Standards and Compliance

Key Standards to Reference

Several standards govern aluminum-zinc coated steel coil, and buyers should know which ones apply to their market. ASTM A792 covers steel sheet with a 55% aluminum-zinc alloy coating for general use. The standard defines the coating designation system, mechanical requirements, and tolerances. ISO 14788 sets similar requirements for continuously hot-dip zinc-aluminum coated steel. EN 10346 covers continuously hot-dip coated steel flat products in Europe. Each standard lists coating classes, and a buyer can match the AZ150 coating weight to the equivalent class in the chosen standard. Galvalume specification sheets from major mills usually cite one or more of these standards. A galvalume coil ordered to ASTM A792 meets a widely recognized benchmark for roofing projects.

Verifying Compliance When Buying

Buyers should confirm compliance before the coil ships. A mill test certificate reports the measured coating weight, substrate grade, and mechanical properties for each coil. Third-party inspection adds independent assurance for large orders. A buyer can also request a sample for bend testing and salt spray evaluation. These checks confirm the corrosion performance claimed on the galvalume data sheet. Reputable galvalume suppliers welcome these requests. A clear paper trail protects both parties and supports the roofing warranty. The coil should arrive with traceable documentation that links each galvalume coil to its test results.

Common Roofing Applications and Uses

Common
Image Source: pexels

Residential and Commercial Roofing

Aluzinc steel coil serves both residential and commercial roofing projects. Homeowners choose the material for pitched roofs on houses, garages, and outbuildings. Commercial builders specify it for warehouses, factories, retail centers, and agricultural buildings. The coil forms into panels that cover large roof areas with few seams. A galvalume roof suits schools, sports facilities, and storage yards as well. These roofing applications demand long service life and low upkeep. The coating resists corrosion in coastal towns, industrial zones, and humid regions. A galvalume steel strip at AZ150 handles all of these settings with consistent results.

Corrugated Roofing Sheet and Profiles

Fabricators turn the coil into corrugated roofing sheet through roll forming. The corrugations add stiffness and help the panel shed water. A galvalume corrugated roofing sheet remains a popular choice for sheds, barns, and industrial sheds. Standing seam panels, tile profiles, and trapezoidal sections also start as this coil. Each profile demands good formability, and the coating weight affects how cleanly the metal bends. Installers favor corrugated roofing for its simple fixing and fast coverage. A galvalume corrugated roofing sheet also resists foot traffic damage during installation. Buyers who need a galvalume roofing sheet for a large project can order long coil runs for consistent color and profile. Corrugated roofing sheets suit both new builds and renovation work. A galvalume corrugated roofing sheet delivers dependable performance across these varied uses.

How to Choose the Right Aluzinc Steel Coil

Quality Inspection Checklist

A buyer should inspect every aluzinc steel coil before acceptance. Start with the mill certificate and confirm the measured coating weight falls within the ordered tolerance. Check the substrate grade, yield strength, and thickness against the purchase order. Look for surface defects such as bare spots, scratches, and coating flakes. Bend a sample coupon to verify adhesion at tight radii. A salt spray test adds confidence for coastal or industrial roofing projects. Confirm the coil edges stay clean and free of rust. Verify the coil weight and inner diameter match the roll former's capacity. A galvalume steel coil from a reputable mill will pass these checks with documented results.

Reject any coil that shows coating loss at the edges or uncoated patches on the surface.

Storage and Handling Tips

Proper storage protects the coating and prevents corrosion before installation. Keep coils indoors or under a dry cover. Raise them off the ground on pallets or dunnage. Store coils on their sides to prevent edge damage. Avoid stacking heavy loads on top of a coil. Use lifting equipment with spreader bars and protective padding. Never drag a coil across a rough floor. Installers should wear clean gloves during handling. A galvalume steel strip stored this way keeps its coating intact. Fabricators who run a galvalume corrugated roofing sheet report fewer rejects when storage follows these rules. Move coils to the forming line promptly and cover partially used coils. These habits protect every coil and extend the life of the finished corrugated roofing sheet. A galvalume corrugated roofing sheet performs best when the coil reaches the line in prime condition. Good handling also supports the warranty on roofing sheets and corrugated roofing profiles.

Buying Checklist for Aluzinc Steel Coil AZ150

Specifications to Confirm

A buyer should confirm several parameters before ordering aluzinc steel coil az150. The table below lists the core items to verify.

ItemWhat to Confirm
Coating weight150 g/m² total, within the mill tolerance
Substrate gradeYield strength and ductility suit the forming operation
ThicknessGauge matches the roofing-sheet specifications
DimensionsInner diameter and weight fit the roll former
SurfaceNo bare spots, scratches, or coating flakes

The coating weight deserves special attention. A measured value below the ordered range signals a problem with the coil. Buyers should also confirm the substrate grade suits the intended roofing applications. Galvalume buyers follow the same checks, because galvalume shares the AZ150 coating system.

Documentation to Request

Paperwork protects the buyer and supports the warranty. Request a mill test certificate for every coil. The certificate should report the measured coating weight, substrate grade, and mechanical properties. Ask for a declaration of conformity to ASTM A792 or the applicable standard. A salt spray report adds confidence for coastal projects. Suppliers of galvalume steel coil should provide traceable records that link each lot to its test results. These documents confirm the corrosion performance claimed for the coating. Keep copies on file for roofing sheets and corrugated roofing sheet orders. A second aluzinc steel coil az150 order then moves faster, and galvalume stock stays easy to audit. Galvalume records also support the roofing warranty.


Aluzinc steel coil AZ150 pairs a proven aluminum-zinc coating with a coating weight well suited to roofing. Buyers should match coating, substrate, and standard to the environment and application. Galvalume shares this coating system, so galvalume data supports the choice. Request a specification sheet, sample, or quote from a qualified supplier to move from research to procurement. This step confirms corrosion performance and coil quality before purchase.

FAQ

Does AZ150 mean the steel is 150 g thick?

No. AZ150 describes the coating weight, not steel thickness. The number states 150 g/m² of aluminum-zinc coating across both surfaces. Buyers specify substrate thickness separately.

How does AZ150 compare with galvanized steel for roofing?

The aluminum-zinc coating adds a barrier layer on top of sacrificial protection. This coating resists atmospheric corrosion longer than plain zinc in most outdoor settings. Galvanized steel costs less upfront.

Can fabricators form AZ150 coil into corrugated profiles?

Yes. The coating adheres tightly and survives roll forming, bending, and moderate drawing. Fabricators should confirm the substrate grade suits the profile. A well-made coil forms cleanly at tight radii.

@2026 Jiangsu Kangtao Steel Co.,Ltd.  Powered by: www.300.cn  SEO  

Business License